Home and Commercial Photovoltaic Energy Storage System

A new photovoltaic energy storage system based on LiFePO4 battery,
integrated battery management system (BMS) and inverter system is widely used in household photovoltaic energy storage,
emergency disaster relief power supply, backup power supply of data room, etc.

  • 5000W Max

    INPUT POWER

  • 10kW Max

    OUTPUT POWER

  • 24kWh

    CAPACITY

System Application Diagram

Charging the system through solar panels or staggered peak power consumption, which can be used in case of power failure or peak power consumption. It is an economic and environmental protection power supply system for families or commercial places.

Bidirectional Inverter Technology
High Power Charge and Discharge

Support up to 5000W solar energy and daily grid charging
Support up to 10kW AC output

Support Multiple Modules Series Connection
Up to 24 kWh

A single battery module is 4KWh, which supports multi-level parallel connection, and the battery module can be selected as needed. The maximum number of battery modules in a single cabinet is 6 groups, with a total of 24kWh

LiFePO4 Battery
Smart "BMS"
Multi Protection Design

The battery module adopts single 40Ah LiFePO4 battery without explosion and fire
Advanced intelligent BMS provides multiple battery protection such as over temperature, over voltage, over current and overcharge

  • Over Current Protection

  • Over Voltage Protection

  • Over Charge Protection

  • Over Discharge Protection

  • Over Temperature Protection

  • Short Circuit Protection

Home Application Scenario

Usually, the cost of electricity can be reduced through this clean energy system,
In case of power failure or emergency,
Independent and controllable renewable power supply

Emergency Disaster Relief Application Scenario

Emergency temporary power demand for electric tools, command and inspection instruments, high brightness lighting, etc. at the rescue and rescue site

SPEC

C5000 / C10000Control Module
  • AC / PV:

    5000W / 10000W Max

  • Input Voltage:

    450V Max

  • AC Output:

    5~10kW

  • Output Voltage:

    100-240V@50/60Hz

  • Work Temputre

    0-40℃

  • Protection Degrees:

    IP20

  • Dimensions:

    480*440*130mm

  • DC Input:

    9-24V (120W max)

  • Weight:

    12.4±0.1kg

SPEC

P4000Battery Module
  • Capacity:

    4000Wh/pcs

  • Power Voltage:

    48V

  • Lifecycle:

    4000+timens

  • Discharge Voltage:

    45V-53.5V

  • Charge Voltage:

    52V-53.5V

  • Current:

    80A Max

  • Communication Interface:

    CAN、RS485

  • Conection Quantity:

    6pcs

  • Work Tempture:

    -20-60℃

  • Work Humidity:

    5%-85%

  • Protection Degrees:

    IP20

  • Dimensions:

    480*630*130mm

  • Weight:

    25±0.1kg